Wednesday, 27 February 2013

How to install more RAM in Laptop?

Your Laptop is indeed your companion, especially when you're on the go. We often take
both our laptops on vacation, in town to catch up on some work. And boosting your
knowledge of your laptop with go a long long way in saving you money by repairing it
yourself.
 
Installing memory is one of the easiest tasks. Take the time to first be sure you have the
right RAM for your computer. If you're in doubt take it back to the place of purchase and
be sure you have the right RAM. After being certain you have the right RAM, you're ready
to open the system unit and begin. But first, you need to remove static electricity.
 
First: Turn Off the Laptop and remove the Battery, normally located on the bottom of
the computer.
 
Second: Turn the Laptop over and locate the RAM compartment. Some Laptops
Memory Module Compartments may be located in another area. Check your owner's
manual to be certain.
 
Third: Remove any and all ESD or Electrical Static Charge from your body and clothes
so no damage to the chips can occur. Use a screwdriver to remove the RAM compartment
cover.
 
Fourth: Study the Memory Modules for a minute to understand how they are installed
so you won't forget how to add the upgraded modules. Grasp the clip holding the old
Module in place and push it up.
Grasp the module and carefully lift it up and out of the socket. Notice the indent in the
module. This allow the module to be installed in only one way.
 
Fifth: Remove the new RAM from its protective wrap and study it to be sure it is not
damaged. Place the module in the empty socket, carefully press down and allow the clips
to click in place.
 
Sixth: Replace the Memory cover, and Battery. Reboot the computer and the operating
system should recognize your new or added memory without any problem.
 
Its that easy when it comes to installing new or more memory. Read your computer's
manual first to find out what type of ram memory you have and what is needed for
upgrades.
 

Tuesday, 26 February 2013

How to Add Random Access Memory to Speed Up Your Desktop

When you purchase a computer, it will come with an adequate amount of RAM or Random Access Memory to run the operating system and all software that is installed.

However,as you install more software, your PC will begin to slowdown. The amount of  RAM you need depends on your operating system on all applications you may be running on your computer at any one time.

Installing memory is one of the easiest tasks. Take the time to first be sure you have the right RAM for your computer. If you're in doubt take it back to the place of purchase and be sure you have the right RAM. After being certain you have the right RAM, you're ready to open the system unit and begin. But first, you need to remove static electricity.

Remove static electricity before you remove the new memory from its protective wrap. Its best to purchase a Wrist Strap if you plan on working in your PC often. But if not, you can simply touch a door knob or your computer's metal case to remove the static electricity. To install your new Ram, perform the following.

Check to see if you have ample light. You may want to have a container to place small screws in. The system unit cover may have small screws and you don't want to lose them. After you have plenty of work space and ample lighting, prepare your mind as well. Make this and every other adventure of working on your computer educational and fun. Take the time to study the actual components inside your computer. You'll be glad you did should something go wrong. Follow these steps to install your drive.

First: Turn off your computer and unplug all peripherals. Take notice of how you unplug or disconnect any devices. Locate the RAM on the motherboard.

Second: Remove the side panel of the tower system or the cover if you have a desktop. Place the panel in a safe place well out of the way.

Third: Before touching anything inside the system unit, remove electrical static charge from your body by touching a door knob or any unpainted metal surface.

Fourth: Remove the new memory from its protective wrapping and locate the sockets or memory banks to install the new memory chips.

Fifth: Notice the type of retaining clips that hold the chips in place. Remove any old chips you intend to move. Now to be sure you won't damage the chips, ground yourself again to remove any remaining static electricity.

Sixth: Pull the retaining clip open and carefully slide the RAM Chips in their memory banks. Push the clips back over the new memory chips.

Seventh: Check and double check the firmness of the chips by gently trying to move the from side to side. Take a good long look at the chips for anything that looks unusual.

Eighth: Replace the system unit cover and reconnect all peripherals. Reboot the computer and the operating system should recognize your new or added memory without any problem.

 Its that easy when it comes to installing new or more memory. Read your computer's manual first to find out what type of ram memory you have and what is needed for upgrades.

 

Monday, 25 February 2013

How to disable indexing services to freeup RAM

Indexing Services is a small little program that uses large amounts of RAM and can often make a computer endlessly loud and noisy. This system process indexes and updates lists of all the files that are on your computer. It does this so that when you do a search for something on your computer, it will search faster by scanning the index lists. If you don't search your computer often, or even if you do search often, this system service is completely unnecessary.
 
To disable do the following:
 
1. Go to Start
2. Click Settings
3. Click Control Panel
4. Double-click Add/Remove Programs
5. Click the Add/Remove Window Components
6. Uncheck the Indexing services
7. Click Next

Sunday, 24 February 2013

Microsoft Word's Keyboard Shortcuts


Result in Microsoft Word


1
.CTRL and A----Selects all in the current document.
2.CTRL and B ----Bold text.
3.CTRL and C----Copies the item or text to the Clipboard and can be pasted using
4.CTRL and V.
5.CTRL and D----Displays the Font dialogue box.
6.CTRL and E----Centre Alignment.
7.CTRL and F----Displays the Find dialog box, to search the current document.
8.CTRL and G----Displays the Go to dialog box, to go to a specific location in the current document.
9.CTRL and H----Displays the Replace dialogue box.
10.CTRL and I----Italic text.
11.CTRL and J----Full Justification.
12.CTRL and K---Create Hyperlink
13.CTRL and L----Left Alignment
14.CTRL and M---Tab
15.CTRL and N----Creates a new document.
16.CTRL and O----Displays the Open File dialogue box.
17.CTRL and P----Displays the Print dialog box.
18.CTRL and R----Right Alignment.
19.CTRL and S----Displays the Save dialog box.
20.CTRL and U---Underline text
21.CTRL and V---Pastes the copied item or text from the Clipboard into the current position in the document.
22.CTRL and X---Cuts the item or text selected to the Clipboard.
23.CTRL and Y---Redo the last undone action.
24.CTRL and Z---Undoes the last action.
25.CTRL and ENTER---Insert Page Break.
26.CTRL and F2---Show Print preview.
27.CTRL and F4---Closes the active document window.
28.CTRL and F6---Opens the next document window.Keyboard Shortcut

Result in Microsoft Word
1.F1 key---Get help or use the Office assistant. SHIFT and F1 Key Context sensitive help.
2.F2 Key---Move text or image. SHIFT and F2 Key Copy Text.
3.F3 Key---Insert an auto text entry. SHIFT and F3 Key Change the case of the selected text.
4.F4 Key---Perform last action again. SHIFT and F4 Key Perform a Find or Go to action again.
5.F5 Key---Displays the Go to dialogue box, from here you can also Find and Replace. SHIFT and F5 Key Move to a previous revision.
6.F6 Key---Go to the next frame or pane. SHIFT and F6 Key ,Go to the previous frame or pane.
7.F7 Key---Launch the Spell checker.SHIFT and F7 Key,Launch the Thesaurus.
8.F8 Key---Extend the current selection. SHIFT and F8 Key,Shrink the current selection.
9.F9 Key---Update the selected fields. SHIFT and F9 Key,Switch between a field code and it's result.
10.F10 Key---Activate the menu bar.SHIFT and F10 Key,Display a Shortcut Menu. Same as right clicking.
11.F11 Key---Go to the next field. SHIFT and F11 Key,Go to the previous field.
12.F12 Key---Save file As, equivalent to tools menu. SHIFT and F12 Key.Save document, equivalent to tools menu.

Saturday, 23 February 2013

How to Create bootable Windows 7, 8, Vista, XP USB flash/pen drive

Let’s begin the guide without wasting time. Just make sure that you have a pen drive with 4GB + capacity if you are making a bootable USB flash drive. Requirements to create bootable Windows USB:
1. Windows 7 or Vista ISO
2. Pen drive with 4GB+ (2 GB is sufficient for XP)
3. 15 Minutes of free time Procedure:
 
1. Insert your USB flash/pen drive to your system and backup all the data from the USB as your USB drive will be formatted during the process.
2. Now download software WinToFlash tool (free).(FROM google)
3. Run the tool, and browse to your Windows 7, Vista, or XP DVD files (make sure that your USB drive letter is correct)
4. Click Create button to begin the bootable USB process. Wait for few minutes to see the bootable USB.
5. That’s all!

Friday, 22 February 2013

30 Most useful windows software

Here are some of the most useful software utilities that you wish were part of standard Windows. These tools are free, light-weight and can be installed on all versions of Windows including the newer Window 8. Click on the headings to follow the link to software.
 
  1. Eraser – When you delete a file in Windows, the contents of the file can still be recovered using other utilities. Eraser lets you permanently delete a file making recovery nearly impossible.
  2. Unlocker – If you are trying to delete a file (or folder) but unable to do so because the “file is in use” by another program, just use Unlocker to end all the locking processes.
  3. ShellExView – As you install new programs, the contextual menu gets cluttered and confusing. With ShellExView, you can clean up the right-click menu and remove all the useless entries.
  4. Everything – Windows includes powerful desktop search capabilities but everything goes one step further. It looks for files and folders irrespective of their location (including temporary files and system folders) and you can also use regular expressions in your search queries.
  5. Always on Top – This tiny utility lets you easily keep any window on top of all other windows on your desktop. For instance, you can answer your emails, work on an Excel sheet while a YouTube video plays in the foreground.
  6. SyncToy – One of the most useful software utilities from Microsoft that lets you keep different folders in sync with each other. You can configure it with Windows Task Manager to run file synchronization jobs automatically at custom intervals.
  7. WinDirStat – Running out of space on Windows? WinDirStat helps you reclaim disk space by creating a visual treemap of your entire hard disk where the area of the colored rectangles is proportional to the size of the underlying folders.
  8. Double Killer – This is the only tool you need to get rid of all duplicate files on your computer including images and music files. It compares the file hash to identify duplicate files.
  9. TCPView – It will list all the software programs (or processes) on your computer that are accessing the Internet including the IP addresses that they are connecting to. Ignore all the columns except Process, Remote Address and State.
  10. Droplr – This is the easiest way to upload your desktop files onto the web. Droplr adds a new option to your Windows “Send to” menu and also places a drop zone on the desktop. Any files that you place in the drop zone are instantly upload and the public link is copied to the clipboard automatically.
  11. TinyGrab – Press a hotkey to grab a quick screenshot of anything that’s on your desktop screen and TinyGrab will put it online in a snap. The screen captures will stay online forever until you remove them.
  12. Mouse Borders – Another useful utility from Microsoft that lets you control multiple computers from the same keyboard and mouse. A better alternative to Synergy.
  13. KatMouse - You can scroll not-in-focus windows with the mouse wheel without selecting the window. Originally written for Windows 2000 but works in Windows 8 as well.
  14. Mouse Jiggler – You computer screen may enter the “sleep” mode if the mouse or the keyboard is not used for a certain period of time. Mouse Jiggler keeps your computer awake by “faking” mouse input thus letting you watch that entire movie from a distance.
  15. AltDrag - It lets you move and resize windows without reaching the borders of a window. Simply hold down the Alt key and then left-click to drag the window or use right-click to resize the window.
  16. ClipX – When you copy anything to your Windows Clipboard, all the previous content is overridden. ClipX preserves the clipboard history and lets you access your previously copied items from the system tray.
  17. RBTray – Sometimes you want to hide windows instead of minimizing them to the Windows task bar. RBTray lets you minimize any window to the system tray by right clicking its minimize button.
  18. MiniBin - This puts the Recycle Bin right into your system tray so you don’t have to minimize all your desktop windows to access the Bin icon. You can also also empty the bin from the system tray.
  19. GearMage – Running out of space in your web inbox. Use the Gearmage utility to find and download email attachments that meet your search criteria to the local drive.
  20. MailStore – If you want offline access to your emails, use MailStore as it helps you download all your emails on the computer or even a USB drive.
  21. MediaInfo - If an audio or video file refuses to play on your computer, chances are that the required codecs are missing on your system. MediaInfo will let you know what codecs are required to play the media file.
  22. DropIt – It is like an advanced file sorting utility that will help you automatically copy or move files into relevant folders based on their extensions, date and other criteria. In the case of music files, you may even sort them by artists or album names.
  23. Teracopy – It takes forever to copy or move files from one folder to another and if the operation is interrupted, you have to start from scratch. Teracopy improves the file copying speed and offers a detailed report in case of any errors.
  24. Soluto – It helps improve the boot-up time of your Windows PC by removing unnecessary programs from the start-up routine and also delaying the launch of certain programs.
  25. Sizer – It let you resize program windows to any fixed, predefined size. Quite handy when you are capturing screenshots for documentation and also for screencasting.
  26. Background Switcher – It pull pictures from your Facebook, Instagram, RSS Feeds, Picasa, Google Images and uses them as rotating wallpaper backgrounds for your desktop.
  27. f.lux – It adjusts the color temperature of your display based on your local time (warm at night and bright during the day). It does this by calculating the sunrise and sunset times of your location.
  28. ZoomIt - It turns your desktop into a virtual whiteboard allowing your to draw /annotate anywhere on the screen using colored pens. An essential tool for presenters.
  29. LockBox – Put all your confidential files into a folder and then use the LockBox utility to completely hide that folder inside Windows Explorer.
  30. Safehouse Explorer – It is easy to misplace USB drives. Safehouse lets you quickly encrypt and password-protect data inside USB drives so others won’t be able to view your files and folders.
 

Thursday, 21 February 2013

How to Protect your Email Address on Internet

Lately, have you started to receive a lot of junk mails and couldn’t figure out the reason for it.Well, this could have happened because you have written your email on a website ,forum ,blog or might have subscribed to a spammy website. Email marketers use special bots that are programmed to automatically collect email ids from websites. If you don’t take precautionary measures you might become their victim and your mailbox will be filled with thousands of spam emails daily. If you have to share your email its better to encrypt it so that bots can’t identify it. You should also password protect and encrypt your emails before sending them for additional security. How to Protect your
 
Email Address on Internet:
 
Go to http://Srm.in website. In the Email field give your Email which you want to protect and then click on Protect my Email. Now in the window you will see the Scrimmed URL of your Email Address. Use this URL in future instead of revealing your original Email Address. Now whenever you have to share your email address ,simply paste the skimmed url.To get your email address the user has to click on the skimmed address and pass the failsafe captcha.

Wednesday, 20 February 2013

How to increase Pen Drive speed?

The speed of  USB flash drive or pen drive can be increased more than two times by the following simple methods.Note that transfer rate is also depend upon the capacity of your usb pendrive and the brand.
 
Tips to increase usb flash drive speed :
1. Connect your pen drive to pc via USB
2. Open my computer then right click on the the drive letter of your pen drive, click properties.
3. Click on the hardware tab , select your pen drive then click properties .
4. In the new window click policies tab..
5. there you can find two options :

a. "optimize for quick removal " and
b."optimize for performance "
By default, it works on the first one.Change it to the second one. ie; select " optimize for performance " then click OK. After doing the first step, format your pen drive with NTFS file system simply by selecting format option in the drop down menu then select NTFS and format.

How to kill a program which is not responding?

When a program is not responding everybody gets angry. But how to instantly close it without getting errors or even restart the pc?
Here it is:

1.ctrl+alt+del
2.click on the program that is not responding
3.hold ctrl and press “end task” That is all.The program will close in less than 10 seconds and you will be happy again.
 

Tuesday, 19 February 2013

How to increase RAM spped to play better game

1. To speed up your windows or to increase RAM virtually, Right click on My Computer >> Properties >> Advanced >> Performance – Settings >> Advanced >> Virtual Memory - Change
Keep the initial size same as recommended and maximum size double of it then restart your system. It will improve speed of windows and you can play some games which
require higher.

2. When a window is active, press the F11 key of the keyboard to get the biggest window possible and press F11 again to restore it.

Monday, 18 February 2013

How to Change Your Processor Name

You can chage your processor name, using Windows Registry. For example my processor is P4 but when i open my system information in that it will Show Core 2 Duo. Changing the Name processor is just for Fun, and also first step of Learning
to Edit Registry.

 
 FOLLOW THE BASIC STEPS :

1. Open your Registry : To open your Registry click Run > Regedit and click OK , it will popup a window called Registry Editor

2. In that on the left hand side you can see a tree structure in that click HKEY_LOCAL_MACHINE

3. In that click Hardware > Description> System > CentralProcessor > 1

4. Now you can see many files in the right side, in that double click Processor Name String.After Clicking little Window Will Pop Up

5. In that Write the what ever wish for example core 2 duo, even your name ...etc

6. To chage again do the same....

Friday, 15 February 2013

How to Increase Life of your DVD Rom

This is for those who watch movies on their computer's dvd rom drive!!! There is a software called dvd idle pro which can really increase the life of your dvd drive. By using the Smart Read-ahead Cache, DVDIdle saves DVD data which will be played soon onto the hard disk cache or RAM cache, and then feeds it to DVD player. This allows the DVD drive to rest. For example: a 6X-speed DVD drive will only work for 15 minutes when you are watching a 90 minutes DVD movie.
 

Thursday, 14 February 2013

How to Solve The Disk is Write-Protected” Problem (Memory card)

Recently when I tried to copy some files to my mmc using card reader it showed me some error saying the disk is write-protected. Remove the write protection or use another disk. It was working fine before. I have used this card many times before but it never gave any error and suddenly it started showing this error. After going through some forums I came to know that it happens because of write protection notch but there was no such notch or switch on my card.I kept on searching on more forums and after some time I found one solution to this problem. Follow the steps given below if you are also facing the same problem.
 
1. Run Registry Editor (regedit).

2. Navigate to the following registry
key:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control

3. Right click on control and create new key.

4. Name it as StorageDevicePolicies . (Copy and paste it from here if possible)

5. Now click on StorageDevicePolicies and in right side pan right click and select create new dword and name it as WriteProtect.

6. Double click on it and set its value to 0.

7. Now restart your machine and try copying some files to your card.

Wednesday, 13 February 2013

20+ Secret Applications / Programs of Windows XP

Lots of hidden application or programs exist in your Windows XP operating system. These hidden applications are really very useful and can saves much time when you really know these applications utility or application. I really amazed by these application. Microsoft never tell you these applications / programs description. All these hidden programs are really powerful for similar activities like registry editing, group policy editing, communicating with others etc. This page presents lots of hidden secret programs / application and you will be glad knowing these hidden applications activities.

In the following paragraphs, you will find 20+ hidden secret applications or programs of Microsoft Windows XP operating system:

Private Character Editor: Hidden Font Editor Private Character Editor is used to create unique letters and logos for your font library according to your own choice. This program is totally for designing icons and Characters.
 
Instructions for Private Character Editor: Click on Start menuand click select Run In the "Run" window, type EUDCEDIT and hit Enter key of your keyboard..

IExpress: Hidden Install Creator IExpress program is for converting your files to EXECUTABLE files. This technology is designed to simplify creation of a setup program. Using the step-by-step IExpress Wizard, you can create self-extracting files that automatically run the setup program contained inside. The setup program can be an .inf file or an executable program. IExpress technology automatically removes the setup files after installation, saving the user time and frustration.

Instructions for IExpress:
1
. Click on Start menu and click select Run
2. In the "Run" window, type iexpress and hit Enter key of your keyboard

Disk Cleanup: Cleaning Harddisk ,This program is used for cleaning harddisk to offer more space to your hard-disk.

Instructions for Disk Cleanup:
1. Click on Start menu and click select Run
2. In the "Run" window, type cleanmgr and hit Enter key of your keyboard

MS-DOS Editor: Hidden Text Editor Windows XP comes with another text editor besides Notepad - it's called the MS-DOS Editor is another text editor like Notepad and it's commonly referred to simply as Edit. You can use it as like Notepad. Moreover, it offers many more features such as the ability to work with multiple text files and change the background and text colors.
Instructions for MS-DOS Editor:
1)Click on Start menu and click select Run .
2) In the "Run" window, type edit and hit Enter key of your keyboard.

Netmeeting: Hidden Internet Conference Application NetMeeting of Windows XP can deliver a complete Internet conferencing solution for all Windows users with multi-point data conferencing, text chat, whiteboard, and file transfer, as well as point-to-point audio and video.
Instructions for Netmeeting:

1. Click on Start menu and click select Run
2. In the "Run" window, type conf and hit Enter key of your keyboard
 
Windows Chat: Hidden Windows ChatProgram Windows Chat can be used to communicate with someone on another computer. But both computers must be connected to the same network (for example, a local area network [LAN] or the Internet) and each computer must be running a similar protocol, such as TCP/IP. So, you can communicate with others easily.
Instructions for Windows Chat:

1. Click on Start menu and click select Run
2. In the "Run" window, type winchat and hit Enter key of your keyboard

Windows Media Player 5.1: Hidden Windows Media Player Do you know that there is is windows media player 5.1 in your windows XP. You can use it to listen music.
Instructions for Windows Windows Media Player 5.1:

1. Click on Start menu and click select Run
2. In the "Run" window, type mplay32 and hit Enter key of your keyboard

Windows Media Player 6.4 : Hidden Windows Media Player This is another secret of Windows XP. Here you can find Windows Media Player 6.4 (classic) to play your media files.
Instructions for Windows Media Player 6.4:

 1. Click on Start menu and click select Run
 2. In the "Run" window, type mplayer2 and hit Enter key of your keyboard
Note:
 Windows Media Player 6.4 (Classic) is installed along with Windows Media Player 7. The only update is that it now supports the latest codecs.

Dr Watson:Troubleshooting tool This program Is for repairing problems in Windows
Instructions for Dr Watson:

1. Click on Start menu and click select Run
2. In the "Run" window, type drwtsn32 and hit Enter key of your keyboard

Clipboard Viewer: Windows ClipboardViewing This program is for viewing contents of Windows clipboard
Instructions for Clipboard Viewer:
1. Click on Start menu and click select Run
 2. In the "Run" window, type clipbrd and hit Enter key of your keyboard

DirectX diagnosis: Diagnose DirectX, video and sound This program is for viewing contents of Windows clipboard
Instructions for DirectX diagnosis:

1.Click on Start menu and click select Run
2. In the "Run" window, type dxdiag and hit Enter key of your keyboard

Character Map: Find unusual characters This program is used for finding unusual characters.
Instructions for Character Map:
1. Click on Start menu and click select Run
2. In the "Run" window, type charmap and hit Enter key of your keyboard

Mcft Synchronization Manager: File synchronization on the network This program is very helpful which allows synchronization of files on the network for when working offline. But this program is apparently undocumented.
Instructions for Mcft Synchronization Manager:

1.Click on Start menu and click select Run
2.In the "Run" window, type mobsync and hit Enter key of your keyboard

ODBC Data Source Administrator : If you like to do with databases, you can use this hidden program of Windows XP.
Instructions for ODBC Data Source Administrator:

   1. Click on Start menu and click select Run
   2. In the "Run" window, type odbcad32 and hit Enter key of your keyboard

Object Packager:-- With this secret Windows XP program, you can do with packaging objects for insertion in files, appears to have comprehensive help files
Instructions for Object Packager:
1.Click on Start menu and click select Run
2.In the "Run" window, type packager and hit Enter key of your keyboard.

Group Policy Editor:--- This program is used to manage group policies, and permissions
Instructions for Group Policy Editor:
1. Click on Start menu and click select Run
2. In the "Run" window, type gpedit.msc and hit Enter key of your keyboard

System configuration:--------- This program is used to control starup programs.
Instructions for System configuration:
1.Click on Start menu and click select Run
2.In the "Run" window, type msconfig and hit Enter key of your keyboard.

Driver Verifier Manager:---- It seems to be a utility for monitoring the actions of drivers, might be useful for people having driver problems. Undocumented.
Instructions for Driver Verifier Manager :

1.Click on Start menu and click select Run
2.In the "Run" window, type verifier and hit Enter key of your keyboard.

Microsoft Telnet Client:------ This program is used to remotely access to any device.
Instructions for Microsoft Telnet Client:
1.Click on Start menu and click select Run
2.In the "Run" window, type telnet and hit Enter key of your keyboard.

System Monitor:---- System Monitor is very useful, highly configurable tool, tells you everything you ever wanted to know about any aspect of PC performance
Instructions for System Monitor:

1.Click on Start menu and click select Run
2.In the "Run" window, type perfmon and hit Enter key of your keyboard.

Program Manager:----- Program Manager is a program that can be used as Legacy Windows 3.x desktop shell.
Instructions for Program Manager:
1.Click on Start menu and click select Run
2.In the "Run" window, type progman and hit Enter key of your keyboard.
Syskey : Secures XP Account database Syskey secures XP account database. Use Syskey with care, it's virtually undocumented but it appears to encrypt all passwords
Instructions for Syskey:
1.Click on Start menu and click select Run
2.In the "Run" window, type syskey and hit Enter key of your keyboard.

System Configuration Editor:------ System Configuration Editor can be used to modify System.ini & Win.ini just like in Win98!
Instructions for System Configuration Editor:

1.Click on Start menu and click select Run
2.In the "Run" window, type sysedit and hit Enter key of your keyboard.

Remote Access phone book:--- This program's documentation is virtually non-existant.
Instructions for Remote Access phone book :
1.Click on Start menu and click select Run
2.In the "Run" window, type rasphone and hit Enter key of your keyboard.

Registry Editor:------- Registry Eidtor is used for hacking the Windows Registry.
Instructions for Registry Editor:
1.Click on Start menu and click select Run
2.In the "Run" window, type regedt32 orregedit and hit Enter key of your keyboard.

Network shared folder wizard:----it
is used to create shared folders on network.
Instructions for Network shared folder wizard:
 
1.Click on Start menu and click select Run
2.In the "Run" window, type shrpubw and hit Enter key of your keyboard.

File siganture verification tool:--- It's a simple file siganture verification
tool.
Instructions for File siganture verification tool:
1.Click on Start menu and click select Run
2.In the "Run" window, type sigverif and hit Enter key of your keyboard.

Volume Control:---- This program is helpful for those people that lose it from the System Notification area.
Instructions for Volume Control:----
1.Click on Start menu and click select Run
2.In the "Run" window, type sndvol32 and hit Enter key of your keyboard.

Monday, 11 February 2013

Useful tips for windows programs


In the following paragraphs, you will find 20+ hidden secret applications or programs of Microsoft Windows XP operating system:

Private Character Editor: Hidden Font Editor Private Character Editor is used to create unique letters and logos for your font library according to your own choice. This program is totally for designing icons and Characters.


Instructions for Private Character Editor: Click on Start menuand click select Run In the "Run" window, type EUDCEDIT and hit Enter key of your keyboard..



IExpress: Hidden Install Creator IExpress program is for converting your files to EXECUTABLE files. This technology is designed to simplify creation of a setup program. Using the step-by-step IExpress Wizard, you can create self-extracting files that automatically run the setup program contained inside. The setup program can be an .inf file or an executable program. IExpress technology automatically removes the setup files after installation, saving the user time and frustration.

Instructions for IExpress:
1
. Click on Start menu and click select Run
2. In the "Run" window, type iexpress and hit Enter key of your keyboard



Disk Cleanup: Cleaning Harddisk ,This program is used for cleaning harddisk to offer more space to your hard-disk.


Instructions for Disk Cleanup:

1. Click on Start menu and click select Run
2. In the "Run" window, type cleanmgr and hit Enter key of your keyboard



MS-DOS Editor: Hidden Text Editor Windows XP comes with another text editor besides Notepad - it's called the MS-DOS Editor is another text editor like Notepad and it's commonly referred to simply as Edit. You can use it as like Notepad. Moreover, it offers many more features such as the ability to work with multiple text files and change the background and text colors.

Instructions for MS-DOS Editor:

1)Click on Start menu and click select Run .


2) In the "Run" window, type edit and hit Enter key of your keyboard.


Netmeeting: Hidden Internet Conference Application NetMeeting of Windows XP can deliver a complete Internet conferencing solution for all Windows users with multi-point data conferencing, text chat, whiteboard, and file transfer, as well as point-to-point audio and video.

Instructions for Netmeeting:


1. Click on Start menu and click select Run


2. In the "Run" window, type conf and hit Enter key of your keyboard

Windows Chat: Hidden Windows ChatProgram Windows Chat can be used to communicate with someone on another computer. But both computers must be connected to the same network (for example, a local area network [LAN] or the Internet) and each computer must be running a similar protocol, such as TCP/IP. So, you can communicate with others easily.

Instructions for Windows Chat:



1. Click on Start menu and click select Run
2. In the "Run" window, type winchat and hit Enter key of your keyboard



Dr Watson:Troubleshooting tool This program Is for repairing problems in Windows

Instructions for Dr Watson:


1. Click on Start menu and click select Run
2. In the "Run" window, type drwtsn32 and hit Enter key of your keyboard



Clipboard Viewer: Windows ClipboardViewing This program is for viewing contents of Windows clipboard


Instructions for Clipboard Viewer:


1. Click on Start menu and click select Run
 2. In the "Run" window, type clipbrd and hit Enter key of your keyboard



DirectX diagnosis: Diagnose DirectX, video and sound This program is for viewing contents of Windows clipboard


Instructions for DirectX diagnosis:



1.Click on Start menu and click select Run
2. In the "Run" window, type dxdiag and hit Enter key of your keyboard


Character Map: Find unusual characters This program is used for finding unusual characters.

Instructions for Character Map:


1. Click on Start menu and click select Run
2. In the "Run" window, type charmap and hit Enter key of your keyboard



Mcft Synchronization Manager: File synchronization on the network This program is very helpful which allows synchronization of files on the network for when working offline. But this program is apparently undocumented.

Instructions for Mcft Synchronization Manager:


1.Click on Start menu and click select Run
2.In the "Run" window, type mobsync and hit Enter key of your keyboard



ODBC Data Source Administrator : If you like to do with databases, you can use this hidden program of Windows XP.

Instructions for ODBC Data Source Administrator:


   1. Click on Start menu and click select Run
   2. In the "Run" window, type odbcad32 and hit Enter key of your keyboard



Object Packager:-- With this secret Windows XP program, you can do with packaging objects for insertion in files, appears to have comprehensive help files

Instructions for Object Packager:

1.Click on Start menu and click select Run
2.In the "Run" window, type packager and hit Enter key of your keyboard.



Group Policy Editor:--- This program is used to manage group policies, and permissions

Instructions for Group Policy Editor:


1. Click on Start menu and click select Run
2. In the "Run" window, type gpedit.msc and hit Enter key of your keyboard


System configuration:--------- This program is used to control starup programs.

Instructions for System configuration:


1.Click on Start menu and click select Run
2.In the "Run" window, type msconfig and hit Enter key of your keyboard.



Driver Verifier Manager:---- It seems to be a utility for monitoring the actions of drivers, might be useful for people having driver problems. Undocumented.

Instructions for Driver Verifier Manager :


1.Click on Start menu and click select Run
2.In the "Run" window, type verifier and hit Enter key of your keyboard.



Microsoft Telnet Client:------ This program is used to remotely access to any device.
 
Instructions for Microsoft Telnet Client:

1.Click on Start menu and click select Run
2.In the "Run" window, type telnet and hit Enter key of your keyboard.



System Monitor:---- System Monitor is very useful, highly configurable tool, tells you everything you ever wanted to know about any aspect of PC performance


Instructions for System Monitor:


1.Click on Start menu and click select Run
2.In the "Run" window, type perfmon and hit Enter key of your keyboard.



Program Manager:----- Program Manager is a program that can be used as Legacy Windows 3.x desktop shell.

Instructions for Program Manager:


1.Click on Start menu and click select Run
2.In the "Run" window, type progman and hit Enter key of your keyboard.



Syskey : Secures XP Account database Syskey secures XP account database. Use Syskey with care, it's virtually undocumented but it appears to encrypt all passwords

Instructions for Syskey:


1.Click on Start menu and click select Run
2.In the "Run" window, type syskey and hit Enter key of your keyboard.


System Configuration Editor:------ System Configuration Editor can be used to modify System.ini & Win.ini just like in Win98!

 Instructions for System Configuration Editor:

1.Click on Start menu and click select Run
2.In the "Run" window, type sysedit and hit Enter key of your keyboard.



Remote Access phone book:--- This program's documentation is virtually non-existant.

Instructions for Remote Access phone book :

1.Click on Start menu and click select Run
2.In the "Run" window, type rasphone and hit Enter key of your keyboard.



Registry Editor:------- Registry Eidtor is used for hacking the Windows Registry.

Instructions for Registry Editor:


1.Click on Start menu and click select Run
2.In the "Run" window, type regedt32 orregedit and hit Enter key of your keyboard.



Network shared folder wizard:----it
is used to create shared folders on network.

Instructions for Network shared folder wizard:


1.Click on Start menu and click select Run
2.In the "Run" window, type shrpubw and hit Enter key of your keyboard.



File siganture verification tool:--- It's a simple file siganture verification
tool.

Instructions for File siganture verification tool:

1.Click on Start menu and click select Run
2.In the "Run" window, type sigverif and hit Enter key of your keyboard.



Volume Control:---- This program is helpful for those people that lose it from the System Notification area.

Instructions for Volume Control:----


1.Click on Start menu and click select Run
2.In the "Run" window, type sndvol32 and hit Enter key of your keyboard.